Beko B5WFT89436W Washer Manual

The Beko B5WFT89436W is a state-of-the-art washing machine designed to provide efficient and effective laundry care. With a capacity of 9 kg and a spin speed of up to 1400 RPM, this washer features advanced technology such as ProSmart Inverter Motor, AquaTech for gentle washing, and a variety of wash programs to suit different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 9 kg capacity, 1400 RPM spin speed, ProSmart Inverter Motor, AquaTech technology, various wash programs including quick wash and eco mode.

Feature	Description
ProSmart Inverter Motor	Quiet operation and energy-efficient performance
AquaTech	Gentle washing technology for delicate fabrics
Quick Wash	Fast wash cycle for lightly soiled clothes
Child Lock	Prevents accidental operation by children
Delay Start	Allows you to set a wash cycle to start later
Energy Efficiency	Rated A+++ for energy savings

Installation

Unpack and inspect contents. Place the washer on a stable, level surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is placed securely in the drain.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts to select language and settings.

Select wash program: Use the dial to choose your desired program.
Adjust settings: Modify temperature and spin speed as needed.
Load laundry: Do not overload the drum for optimal performance.

CAUTION! Ensure the door is securely closed before starting.

Specifications

Capacity: 9 kg.
Spin Speed: Up to 1400 RPM.
Energy Rating: A+++.
Dimensions: 85 cm x 60 cm x 55 cm.
Weight: 70 kg.
Noise Level: 54 dB (washing), 76 dB (spinning).
Water Consumption: 45 liters per cycle.

Controls and Settings

Access settings via the control panel. Use the program dial to select wash cycles and the buttons for additional options like temperature and spin speed.

Display: LED display shows time remaining and selected settings.

Connecting Water Supply

Ensure the washer is connected to a cold water supply. Use the provided inlet hose and tighten securely.

Turn off the water supply before connecting.
Check for leaks after connection.

Tip: Regularly check hoses for wear and tear.

Operating the Washer

Load laundry, select the desired program, and press the start button. The washer will automatically adjust settings based on the selected program.

Press START/PAUSE to begin the cycle.
Monitor the progress via the display.
Press END to cancel the cycle if needed.

WARNING! Do not open the door during operation.

Maintenance and Care

Regularly clean the detergent drawer and filter to ensure optimal performance.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power connection and outlet.
No water filling	Inlet hose kinked	Check and straighten the inlet hose.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Door not locking	Obstruction in the door	Check for items blocking the door.
Water leakage	Damaged hose	Inspect hoses for damage and replace if necessary.

Reset: Unplug for 5 minutes to reset the system.

Service: For assistance, contact Beko customer service.