Beko CM 10142 B Washer Manual

The Beko CM 10142 B is a modern washing machine designed for efficiency and convenience. It features a variety of wash programs, energy-saving technology, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Energy-efficient motor, multiple wash programs, digital display, delay start option, and child lock feature.

Feature	Description
Energy Efficiency	Designed to save water and electricity
Wash Programs	Multiple settings for different fabric types
Digital Display	Easy-to-read interface for program selection
Delay Start	Allows you to set a wash cycle to start later
Child Lock	Prevents accidental changes to settings

Installation

Unpack the washer and inspect for any damage. Ensure a stable and level surface for installation.

Connect the water supply: Attach the inlet hose to the water tap.
Drain hose: Position the drain hose into the drainage system.
Plug into a power outlet: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select your preferred settings.

Select language: Choose your preferred language from the settings menu.
Set water hardness: Adjust according to your local water supply.
Run a test cycle: Use the empty wash cycle to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko CM 10142 B.
Washing Capacity: 7 kg.
Spin Speed: 1400 RPM.
Energy Rating: A+++.
Dimensions: 85 cm x 60 cm x 55 cm.
Weight: 70 kg.
Noise Level: 54 dB (washing), 76 dB (spinning).

Controls and Settings

Access the control panel to select wash programs, adjust settings, and monitor the cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Features include: Delay Start, Child Lock, and Quick Wash options.

Connecting Water Supply

Ensure the water supply is connected properly to avoid leaks.

Turn off the water supply before connecting hoses.
Ensure the inlet hose is securely attached to the tap.
Check for any leaks before using the washer.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Follow these steps to operate your washing machine effectively.

Load laundry: Do not overload the drum.
Select wash program: Choose the appropriate cycle for your laundry.
Start the cycle: Press the Start button to begin washing.
Monitor progress: The digital display will show the remaining time.

WARNING! Do not open the door during the wash cycle.

Maintenance and Care

Regular maintenance will ensure the longevity of your washer.

Clean the filter regularly to prevent blockages.
Wipe the door seal and drum after each use.
Run a maintenance wash monthly to keep the drum fresh.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Blocked inlet filter	Clean the inlet filter.
Excessive vibration	Unlevel installation	Adjust the feet to level the washer.
Door won't open	Cycle not finished	Wait for the cycle to complete.
Odor in drum	Residual moisture	Run a maintenance wash with vinegar.

Service: For further assistance, contact Beko customer service.