Beko WB 10106 IT Washer Manual

The Beko WB 10106 IT is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, energy-saving options, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient motor, digital display, and child lock feature.

Feature	Description
Multiple Wash Programs	Includes cotton, synthetic, delicate, and quick wash options.
Energy Efficiency	Rated A+++ for energy savings.
Digital Display	Easy-to-read interface for program selection and time remaining.
Child Lock	Prevents accidental operation by children.
Delay Start	Allows you to set a delayed start time for washing.

Installation

Unpack and inspect contents. Place the washer on a stable, level surface.

Connect the water supply: Attach the inlet hose to the water tap.
Drain hose: Ensure the drain hose is positioned correctly.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and settings.

Set language: Choose your preferred language from the menu.
Run a test cycle: Use the empty wash cycle to check functionality.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Washing Capacity: 10 kg.
Spin Speed: Up to 1400 RPM.
Energy Rating: A+++.
Dimensions: 85 cm (H) x 60 cm (W) x 60 cm (D).
Weight: 70 kg.
Noise Level: 54 dB (washing), 76 dB (spinning).

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting the inlet hose.

Attach the inlet hose to the water tap securely.
Check for leaks after turning on the water supply.

Tip: Use a wrench to tighten connections if necessary.

Operating the Washer

Load laundry, select the desired program, and press Start.

Open the door and load laundry evenly.
Add detergent to the dispenser.
Select the wash program and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer; follow capacity guidelines.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and drum periodically.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Inlet hose kinked	Ensure hose is straight and not blocked.
Excessive vibrations	Unlevel surface	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate program.

Service: For further assistance, contact Beko customer service.