Beko WCC 7612 BS Washer Manual

The Beko WCC 7612 BS is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, a large capacity drum, and advanced technology to ensure optimal cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Front-loading design, large capacity drum, multiple wash programs, energy-efficient operation, and user-friendly controls.

Feature	Description
Wash Programs	Multiple settings for different fabric types and soil levels
Energy Efficiency	Designed to minimize water and energy consumption
Delay Start	Allows you to set a delayed start time for convenience
Child Lock	Prevents accidental changes to settings during operation
Quick Wash	Fast cycle for lightly soiled clothes

Installation

Unpack and inspect contents. Place the washer on a flat, stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is positioned correctly to avoid leaks.
Plug into AC power: Ensure the outlet is grounded and suitable for the washer.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and settings.

Set the water hardness level: Adjust according to your local water supply.
Choose preferred wash programs: Familiarize yourself with the available options.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko WCC 7612 BS
Capacity: 7 kg
Spin Speed: Up to 1200 RPM
Energy Rating: A+++ (most efficient)
Dimensions: 84 x 60 x 54 cm
Weight: 70 kg
Water Consumption: 45 liters per cycle

Controls and Settings

Access settings via the control panel. Features include program selection, temperature adjustment, and spin speed control.

Display: LED indicators for cycle status and remaining time.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the washer and the water tap.
Check for leaks after turning on the water supply.

Tip: Use a wrench to ensure a tight fit without over-tightening.

Operating the Washer

Select the desired wash program and press start. Monitor the cycle through the display.

Load laundry: Do not overload the drum.
Add detergent: Use the appropriate compartment.
Start the cycle: Press the start button to begin.

WARNING! Do not open the door during operation.

Maintenance and Care

Regularly clean the detergent drawer and door seal. Run a maintenance wash monthly.

CAUTION! Unplug the washer before performing any maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power connection and outlet.
No water filling	Inlet hose kinked	Check and straighten the inlet hose.
Excessive vibrations	Unbalanced load	Redistribute laundry evenly in the drum.
Door not locking	Obstruction	Ensure nothing is blocking the door.

Reset: Refer to the user manual for reset instructions.

Service: 1-800-555-0199; www.beko.com