Beko WKL 13560 K Washer Manual

The Beko WKL 13560 K is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, energy-saving options, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy efficiency, large capacity drum, and user-friendly controls.

Feature	Description
Multiple Wash Programs	Includes options for cotton, synthetic, delicate, and quick wash.
Energy Efficiency	Rated A+++ for energy savings.
Large Capacity Drum	Can handle up to 8 kg of laundry.
Delay Start	Allows you to set the washer to start at a later time.
Child Lock	Prevents accidental changes to settings.

Installation

Unpack the washer and inspect for any damage. Place the washer on a flat, stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is securely placed in the drain.
Plug into a power outlet: Ensure the voltage matches the specifications.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set your preferences.

Select your language: Choose from the available options.
Set the water hardness level: Adjust according to your local water supply.
Run a test cycle: Use an empty load to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko WKL 13560 K.
Capacity: 8 kg.
Energy Rating: A+++.
Spin Speed: Up to 1400 RPM.
Dimensions: 85 cm (H) x 60 cm (W) x 55 cm (D).
Weight: 70 kg.
Noise Level: 54 dB (wash), 76 dB (spin).

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Display: Shows remaining time, selected program, and error messages.

Connecting Water Supply

Ensure the water supply is connected properly to avoid leaks.

Turn off the water supply before connecting hoses.
Check for any kinks in the hoses.
Ensure the connections are tight and leak-free.

Tip: Regularly check hoses for wear and replace if necessary.

Operating the Washer

Follow the instructions to load laundry and select the appropriate wash cycle.

Load laundry: Do not overload the drum.
Add detergent: Use the correct type for your wash program.
Select the wash program and start the cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance will prolong the life of your washer.

Clean the detergent drawer regularly.
Check and clean the filter periodically.
Wipe down the door seal to prevent mold.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Water supply issue	Ensure water tap is open and hoses are connected.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Service: For further assistance, contact Beko support.