Beko WM 5100 S Washer Manual

The Beko WM 5100 S is a front-loading washing machine designed for efficiency and convenience. With a capacity of 5 kg, it features multiple wash programs, energy-efficient performance, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient motor, user-friendly control panel.

Feature	Description
Load Capacity	5 kg capacity for efficient washing
Wash Programs	Multiple programs for different fabric types
Energy Efficiency	Class A energy rating for lower consumption
Spin Speed	Up to 1200 RPM for effective water extraction
Delay Start	Set a delay for washing to start at a convenient time
Child Lock	Prevents accidental operation by children

Installation

Unpack and inspect the washing machine. Place it on a stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Level the machine: Adjust the feet to ensure it is level.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select wash program: Use the dial to choose the desired program.
Set temperature: Adjust the temperature setting as needed.
Load laundry: Ensure not to overload the drum.
Start the wash: Press the start button to begin.

CAUTION! Ensure the door is securely closed before starting.

Specifications

Model: Beko WM 5100 S
Load Capacity: 5 kg
Energy Rating: Class A
Spin Speed: 1200 RPM
Dimensions: 85 x 60 x 55 cm
Weight: 70 kg
Power Consumption: 2200 W
Water Consumption: 45 liters per cycle

Controls and Settings

Access the control panel to select wash programs, temperature, and spin speed. The display shows the remaining time and status of the wash cycle.

Connecting Water Supply

Ensure the water supply is turned off before connecting the inlet hose.

Attach the hose to the water tap securely.
Check for leaks after turning on the water supply.

Tip: Use a hose with a filter to prevent debris from entering the machine.

Operating the Washer

Follow the instructions for selecting the wash program and starting the machine. Monitor the display for progress.

Maintenance and Care

Regularly clean the detergent drawer and door seal. Run a maintenance wash monthly to keep the drum clean.

CAUTION! Unplug the machine before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Blocked inlet filter	Clean the inlet filter and check hose.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for the cycle to finish; check for obstructions.

Service: For further assistance, contact Beko customer service.