Beko WM 5140 W Washer Manual

The Beko WM 5140 W is a front-loading washing machine designed for efficiency and ease of use. It features a variety of wash programs, a large capacity drum, and energy-saving technologies. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, large capacity drum, multiple wash programs, energy-efficient operation, and user-friendly interface.

Feature	Description
Large Capacity Drum	Holds up to 7 kg of laundry
Multiple Wash Programs	Includes cotton, synthetic, delicate, and quick wash options
Energy Efficiency	Rated A+++ for energy savings
Child Lock	Prevents accidental operation
Delay Start	Allows you to set a wash cycle to start later

Installation

Unpack the washer and inspect for any damage. Place on a stable surface and ensure it is level.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is positioned correctly to avoid leaks.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set your preferences.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on your water quality.
Run a test cycle: Use an empty load to ensure proper operation.

CAUTION! Ensure the washer is level before use.

Specifications

Washing Capacity: 7 kg.
Energy Rating: A+++.
Spin Speed: Up to 1400 RPM.
Dimensions: 84 x 60 x 54 cm (H x W x D).
Noise Level: 54 dB (washing), 76 dB (spinning).
Water Consumption: 49 liters per cycle.

Controls and Settings

Access the control panel to select wash programs, adjust settings, and monitor the cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is connected properly to avoid leaks.

Turn off the water supply before connecting hoses.
Check for any leaks after connecting.
Ensure the drain hose is positioned correctly.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Load laundry, select the desired program, and press Start.

Open the door and load laundry evenly.
Add detergent to the appropriate compartment.
Select the wash program and options.
Press Start to begin the cycle.

WARNING! Do not overload the washer.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Wipe down the door seal to prevent mold.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hose kinked	Ensure hose is straight and not blocked.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Service: For further assistance, contact Beko customer service.