Beko WM 6123 S Washer Manual

The Beko WM 6123 S is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, a large capacity drum, and energy-saving technologies. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient motor, large capacity drum, and user-friendly interface.

Feature	Description
Multiple wash programs	Various settings for different fabric types and soil levels
Energy-efficient motor	Reduces energy consumption while maintaining performance
Large capacity drum	Accommodates larger loads for fewer washes
Child lock	Prevents accidental operation by children
Delay start	Allows you to set a wash cycle to start at a later time

Installation

Unpack and inspect contents. Place the washer on a flat, stable surface.

Connect water supply: Attach hoses to the water inlet.
Connect drain hose: Ensure it is positioned correctly for drainage.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and settings.

Set preferred wash programs: Use the control panel to select desired settings.
Adjust water hardness settings if necessary.
Run a test cycle to ensure proper operation.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko WM 6123 S
Load Capacity: 6 kg
Energy Rating: A+++ (most efficient)
Spin Speed: 1200 RPM
Dimensions: 84 x 60 x 54 cm
Weight: 70 kg
Noise Level: 54 dB (washing), 76 dB (spinning)

Controls and Settings

Access the control panel for wash program selection, temperature settings, and spin speed adjustments.

Buttons: Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the water supply.
Ensure the drain hose is securely positioned.
Turn on the water supply and check for leaks.

Tip: Use a wrench to ensure hoses are tightly secured.

Operating the Washer

Follow the instructions for selecting wash programs and starting the machine.

Load laundry into the drum.
Add detergent to the appropriate compartment.
Select the desired wash program and press Start.
Monitor the cycle progress via the display.

WARNING! Do not overload the washer to prevent damage.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter periodically.
Wipe down the exterior with a damp cloth.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and outlet.
No water filling	Hose kinked	Ensure hoses are not kinked or blocked.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Incorrect program	Ensure the correct wash program is selected.

Service: For further assistance, contact Beko customer service.