Beko WM 6123 W Washer Manual

The Beko WM 6123 W is a front-loading washing machine designed for efficiency and ease of use. It features a variety of wash programs, a large capacity drum, and energy-saving technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, large capacity drum, multiple wash programs, energy-efficient motor, and user-friendly control panel.

Feature	Description
Wash Programs	Includes cotton, synthetic, delicate, and quick wash options.
Energy Efficiency	Rated A+++ for energy savings.
Delay Start	Allows you to set a wash cycle to start later.
Child Lock	Prevents accidental changes to settings.
Large Capacity	Can handle up to 6 kg of laundry.

Installation

Unpack the washer and inspect for any damage. Place it on a flat, stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Drain hose: Position the drain hose into the sink or drainage system.
Level the machine: Adjust the feet to ensure the washer is level.
Plug into AC power.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts.

Select your preferred language.
Set the water hardness level for optimal washing.
Run a test cycle to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Beko WM 6123 W.
Washing Capacity: 6 kg.
Energy Rating: A+++.
Spin Speed: Up to 1200 RPM.
Dimensions: 84 x 60 x 54 cm (H x W x D).
Weight: 70 kg.
Noise Level: 54 dB (washing), 76 dB (spinning).

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the washing cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting the inlet hose.

Attach the hose to the tap securely.
Check for leaks after turning the water supply back on.

Tip: Use a wrench to tighten connections if necessary.

Operating the Washer

Load the laundry, add detergent, and select the desired wash program.

Open the door and load clothes.
Add detergent to the appropriate compartment.
Close the door and select the wash program.
Press Start to begin the cycle.

WARNING! Do not overload the washer to avoid damage.

Maintenance and Care

Regularly clean the filter and drum to maintain performance.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hose kinked	Ensure hose is straight and not blocked.
Excessive noise	Unbalanced load	Redistribute clothes evenly in the drum.
Leaking water	Loose connections	Check and tighten all hose connections.

Service: For further assistance, contact Beko customer support.