Beko WM 6355 W Washer Manual

The Beko WM 6355 W is a front-loading washing machine designed for efficiency and convenience. With a capacity of 6 kg, it features multiple wash programs, a high spin speed of 1200 RPM, and energy-efficient performance. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include: 6 kg capacity, 1200 RPM spin speed, multiple wash programs, and energy efficiency rating A+++.

Feature	Description
Load Capacity	6 kg for optimal washing
Spin Speed	1200 RPM for effective water extraction
Energy Rating	A+++ for energy efficiency
Wash Programs	Various programs for different fabric types
Delay Start	Set the washer to start at a later time
Child Lock	Prevents accidental program changes

Installation

Unpack the washer and inspect for any damage. Place the washer on a flat, stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is securely placed in the drain.
Plug into a power outlet: Ensure the voltage matches the specifications.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer and select the desired wash program.

Set the wash temperature: Choose based on fabric type.
Select the spin speed: Adjust according to load requirements.
Press the start button to begin washing.

CAUTION! Do not overload the washer for optimal performance.

Specifications

Model: Beko WM 6355 W
Load Capacity: 6 kg
Spin Speed: 1200 RPM
Energy Rating: A+++ (most efficient)
Dimensions: 84 x 60 x 54 cm
Weight: 70 kg
Water Consumption: 44 liters per cycle
Noise Level: 54 dB during washing

Controls and Settings

Access the control panel to select wash programs, temperature, and spin speed. The display shows the remaining time and status of the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting the inlet hose.

Attach the inlet hose to the water tap securely.
Check for leaks after turning on the water supply.
Ensure the drain hose is positioned correctly to avoid backflow.

Tip: Use a hose clamp for a secure connection.

Operating the Washer

Follow the selected wash program instructions for optimal results.

Load laundry into the drum without overloading.
Add detergent to the designated compartment.
Select the desired program and press start.
Wait for the cycle to complete before unloading.

WARNING! Do not open the door during the wash cycle.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

Clean the detergent drawer regularly.
Check and clean the filter to prevent blockages.
Wipe the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water supply	Inlet hose kinked	Ensure hose is straight and not blocked.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Water leaking	Loose connections	Check hoses and tighten connections.
Cycle not completing	Power interruption	Check for power supply issues.

Reset: Unplug the washer for 5 minutes to reset.