Beko WM218 Washer Manual

The Beko WM218 is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, energy-saving options, and a user-friendly interface. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting 10. Regulatory Information

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient motor, digital display, and delay start option.

Feature	Description
Wash Programs	Multiple settings for different fabric types and soil levels
Energy Efficiency	Low water and energy consumption ratings
Digital Display	Easy-to-read interface for program selection and time remaining
Delay Start	Allows you to set the washer to start at a later time
Child Lock	Prevents accidental changes to settings during operation

Installation

Unpack the washer and inspect for any damage. Place the washer on a stable, level surface.

Connect the water supply: Attach hoses to the water inlet valves.
Connect the drain hose: Ensure it is securely placed in the drain.
Plug into a power outlet: Ensure the outlet is properly grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select your preferred settings.

Select language: Choose your preferred language from the settings menu.
Run a test cycle: This helps to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko WM218
Capacity: 8 kg
Spin Speed: 1200 RPM
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm (H) x 60 cm (W) x 55 cm (D)
Weight: 70 kg
Water Consumption: 50 liters per cycle

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting the hoses.

Attach the inlet hose to the washer and the water supply.
Check for leaks after turning the water supply back on.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Load the washer, select the desired program, and press Start.

Load laundry: Do not overload the drum.
Add detergent: Use the appropriate compartment for detergent.
Press Start: The washer will begin the selected cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Wipe the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust the feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the system.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.beko.com or contact customer service.