Beko WM310 Washer Manual

The Beko WM310 is a front-loading washing machine designed for efficiency and convenience. It features multiple wash programs, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient settings, large capacity drum, and easy-to-use control panel.

Feature	Description
Multiple wash programs	Various settings for different fabric types and soil levels
Energy-efficient	Low water and energy consumption
Large capacity drum	Holds up to 7 kg of laundry
Delay start option	Allows you to schedule washes at your convenience
Child lock	Prevents accidental operation by children

Installation

Unpack and inspect the washing machine. Place it on a stable, level surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is positioned correctly in the drain.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select your preferred language.
Set the water hardness level for optimal wash performance.
Run a test cycle to ensure everything is functioning correctly.

CAUTION! Ensure the machine is level to prevent vibrations during operation.

Specifications

Model: Beko WM310
Capacity: 7 kg
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm (H) x 60 cm (W) x 55 cm (D)
Weight: 70 kg
Water Consumption: 45 liters per cycle
Spin Speed: Up to 1200 RPM

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the machine. The display shows remaining time and cycle status.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is turned off before connecting the inlet hose.

Attach the inlet hose to the water tap securely.
Check for leaks after turning the water supply back on.

Tip: Use a wrench to tighten connections if necessary.

Operating the Washer

Load laundry into the drum, select the desired program, and press Start.

Load clothes evenly to prevent imbalance.
Select the appropriate wash program based on fabric type.
Press Start to begin the wash cycle.

WARNING! Do not overload the machine; refer to the capacity guidelines.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and drum periodically.

CAUTION! Unplug the machine before performing maintenance tasks.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Inlet hose kinked	Ensure hose is straight and connected.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish; check for blockages.

Service: For further assistance, contact Beko customer support.