Beko WM710 Washer Manual

The Beko WM710 is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, energy-saving options, and a user-friendly interface. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include: multiple wash programs, energy efficiency, child lock, and a delay start option.

Feature	Description
Multiple Wash Programs	Various settings for different fabric types and soil levels.
Energy Efficiency	Designed to consume less water and electricity.
Child Lock	Prevents accidental changes to settings during operation.
Delay Start	Allows you to set a delayed start time for the wash cycle.

Installation

Unpack the washer and inspect for any damage. Place the washer on a flat, stable surface.

Connect the water supply hoses to the appropriate inlet valves.
Ensure the drain hose is properly positioned.
Plug the washer into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select your preferred settings.

Select the desired wash program using the control dial.
Adjust temperature and spin speed as needed.
Press the start button to begin the wash cycle.

CAUTION! Ensure the door is securely closed before starting.

Specifications

Model: Beko WM710.
Capacity: 7 kg.
Energy Rating: A+++.
Spin Speed: 1200 RPM.
Dimensions: 85 cm x 60 cm x 55 cm.
Weight: 70 kg.
Water Consumption: 45 liters per cycle.

Controls and Settings

Access settings via the control panel. Key buttons include: Start/Pause, Program Selector, and Temperature Control.

Display: Shows remaining time and cycle status.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hoses to the washer and water supply.
Check for leaks after turning the water supply back on.

Tip: Use a wrench to tighten connections securely.

Operating the Washer

Load the washer with laundry, add detergent, and select the desired program.

Press Start to begin the wash cycle.
Monitor the cycle through the display.
Remove laundry promptly after the cycle ends.

WARNING! Do not overload the washer to ensure optimal performance.

Maintenance and Care

Regularly clean the detergent drawer and filter to maintain performance.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water entering	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Service: For further assistance, contact Beko customer support.