Beko WM7110W Washer Manual

The Beko WM7110W is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, large capacity drum, multiple wash programs, energy-efficient settings, and user-friendly controls.

Feature	Description
Large Capacity Drum	Holds up to 7 kg of laundry for fewer loads.
Multiple Wash Programs	Includes cotton, synthetic, delicate, and quick wash options.
Energy Efficiency	Rated A+++ for energy savings.
Child Lock	Prevents accidental operation by children.
Delay Start	Allows you to set a wash cycle to start later.

Installation

Unpack the washer and inspect for any damage. Place it on a stable, level surface.

Connect the water supply hose to the tap.
Ensure the drain hose is positioned correctly.
Plug the washer into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select your preferred language and settings.

Set the water hardness level in the settings menu.
Run a test cycle without laundry to clean the drum.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Beko WM7110W
Capacity: 7 kg
Energy Rating: A+++.
Spin Speed: Up to 1200 RPM.
Dimensions: 84 x 60 x 54 cm.
Weight: 70 kg.
Water Consumption: 49 liters per cycle.

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure the water supply is connected properly to avoid leaks.

Turn off the water supply before connecting the hose.
Use the provided hose to connect to the tap.
Check for leaks after turning the water supply back on.

Tip: Use a hose with a filter to prevent debris from entering the washer.

Operating the Washer

Load laundry, select the desired wash program, and press Start.

Open the door and load laundry evenly.
Add detergent to the designated compartment.
Select the wash program and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure optimal performance.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Wipe down the exterior with a damp cloth.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Water supply issue	Ensure water supply is turned on.
Excessive vibrations	Unlevel washer	Adjust the feet to level the washer.
Door won't open	Cycle not completed	Wait for the cycle to finish.
Odor from washer	Residual moisture	Run a maintenance wash with vinegar.

Service: For further assistance, contact Beko customer service.