Beko WMA 651 W Washer Manual

The Beko WMA 651 W is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, large capacity drum, multiple wash programs, energy-efficient settings, and a user-friendly control panel.

Feature	Description
Load Capacity	Up to 6 kg of laundry
Spin Speed	Up to 1200 RPM for efficient drying
Energy Rating	A++ for energy efficiency
Wash Programs	Multiple settings for different fabric types
Delay Start	Set wash cycles to start later
Child Lock	Prevents accidental changes during operation
Quick Wash	Fast wash cycle for lightly soiled clothes
Eco Mode	Energy-saving wash cycle

Installation

Unpack the washer and inspect for any damage. Place the washer on a stable surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is properly positioned in the drain.
Level the washer: Adjust the feet to ensure stability.
Plug into a power outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts.

Select language: Choose your preferred language on the display.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Use the empty wash cycle to ensure proper operation.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Beko WMA 651 W
Load Capacity: 6 kg
Spin Speed: 1200 RPM
Energy Efficiency: A++
Dimensions: 84 x 60 x 54 cm
Weight: 70 kg
Power Consumption: 2200 W
Water Consumption: 49 L per cycle

Controls and Settings

Access the control panel for wash settings, including temperature, spin speed, and program selection.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Display: Shows cycle time, selected program, and error messages.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the water tap securely.
Check for leaks after connecting.
Ensure the drain hose is positioned correctly to avoid overflow.

Tip: Use a hose with a rubber washer to prevent leaks.

Operating the Washer

Load laundry into the drum, add detergent, and select the desired wash program.

Open the door and load clothes.
Add detergent to the drawer.
Select the wash program and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer; follow load capacity guidelines.

Maintenance and Care

Regularly clean the detergent drawer and door seal. Run a maintenance wash monthly.

CAUTION! Unplug the washer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hose kinked	Ensure hose is straight and not blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.
Odor in drum	Residual detergent	Run a maintenance wash with vinegar.

Service: For further assistance, contact Beko support.