Beko WMA 667 S Washer Manual

The Beko WMA 667 S is a front-loading washing machine designed for efficiency and convenience. It features a variety of wash programs, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Washer 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient settings, large capacity drum, and user-friendly interface.

Feature	Description
Wash Programs	Multiple settings for different fabric types and soil levels
Energy Efficiency	Designed to reduce water and energy consumption
Large Capacity	Can handle up to 7 kg of laundry per load
Child Lock	Prevents accidental changes to settings
Delay Start	Allows you to set a wash cycle to start later

Installation

Unpack the washer and inspect for any damage. Place it on a stable, level surface.

Connect the water supply: Attach the inlet hose to the water tap.
Connect the drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Ensure the voltage matches the washer's requirements.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select language and settings.

Set the language: Choose your preferred language from the menu.
Run a test cycle: Use the empty wash cycle to ensure everything is functioning.

CAUTION! Ensure the washer is level to prevent vibrations during operation.

Specifications

Model: Beko WMA 667 S
Load Capacity: 7 kg
Energy Rating: A+++ (most efficient)
Spin Speed: Up to 1600 RPM
Dimensions: 85 cm (H) x 60 cm (W) x 55 cm (D)
Water Consumption: 44 liters per cycle
Noise Level: 54 dB (washing), 76 dB (spinning)

Controls and Settings

Access the control panel to select wash programs, adjust settings, and start the wash cycle.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Connecting the Washer

Ensure the washer is connected to both water supply and drainage systems.

Turn off the water supply before connecting hoses.
Ensure the drain hose is positioned correctly to avoid leaks.

Tip: Check for leaks after installation.

Operating the Washer

Follow the instructions to select the appropriate wash cycle for your laundry.

Load laundry into the drum.
Add detergent to the dispenser.
Select the desired wash program and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure optimal performance.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter periodically.
Wipe the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Water supply issue	Ensure water supply is turned on.
Excessive vibration	Unlevel installation	Adjust the feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish.

Service: For further assistance, contact Beko customer service.