Beko WMA 667 W Washer Manual

The Beko WMA 667 W is a front-loading washing machine designed for efficiency and convenience. It features a range of wash programs, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient performance, and user-friendly controls.

Feature	Description
Load Capacity	Up to 6 kg of laundry
Spin Speed	Up to 1200 RPM for effective drying
Energy Rating	A++ for energy efficiency
Wash Programs	Includes cotton, synthetic, delicate, and quick wash options
Delay Start	Allows programming of wash cycles up to 24 hours in advance
Child Lock	Prevents accidental changes to settings
Water Consumption	Optimized for minimal water usage
Noise Level	Quiet operation at 58 dB during washing

Installation

Unpack and inspect the washing machine. Place it on a stable, level surface.

Connect the water supply: Attach the inlet hose to the water tap.
Drain hose: Position the drain hose into the drainage system.
Level the machine: Adjust the feet to ensure stability.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts.

Select wash program: Use the dial to choose the desired cycle.
Load laundry: Ensure not to overload the drum.
Add detergent: Use the appropriate compartment for detergent.
Start the cycle: Press the start button to begin washing.

CAUTION! Ensure the door is securely closed before starting.

Specifications

Model: Beko WMA 667 W
Load Capacity: 6 kg
Spin Speed: 1200 RPM
Energy Efficiency: A++
Dimensions: 84 x 60 x 54 cm
Weight: 70 kg
Noise Level: 58 dB (Washing)
Water Consumption: 49 liters per cycle

Controls and Settings

Access the control panel for selecting wash programs, adjusting settings, and starting the machine.

Buttons: Power, Start/Pause, Program Selector, Temperature Control, Spin Speed Control.

Additional settings include delay start and child lock features.

Connecting Water Supply

Ensure the water supply is connected properly to avoid leaks.

Turn off the water supply before connecting hoses.
Check for any leaks after connecting.
Ensure the drain hose is positioned correctly.

Tip: Regularly check hoses for wear and tear.

Operating the Washer

Follow the instructions for operating the washing machine effectively.

Load laundry and add detergent.
Select the desired wash program.
Press the start button to begin the wash cycle.
Monitor the cycle through the display panel.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Wipe the exterior with a damp cloth.

CAUTION! Unplug the machine before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hose kinked or blocked	Inspect hoses for kinks or blockages.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.
Water leakage	Loose hose connections	Tighten all hose connections securely.

Reset: Unplug the machine for a few minutes to reset.

Service: Contact Beko customer service for assistance.